| Age | Commit message (Collapse) | Author |
|---|
|
When JTAG is connected, internal logic leads to the bit
MIPS_CTL0_DBG_RST_DASRT (for the debug unit) stay high and
this prevents normal cluster power-up.
Force proper power-on reset value prior to power-up sequence.
Hold this value for about 10 usec
Signed-off-by: Vladimir Kondratiev <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
Signed-off-by: Vladimir Kondratiev <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
SBI code arranges domain PMP regions in a way that last entry is
all-inclusive "0..~0 RWX" and the rest of entries are not programmed.
This causes a problem for the eyeq7h.
CPU can issue speculative prefetches to non-existent addresses. If this
access goes to the system NOC, it is mis-interpreted as an access
violation and error is reported, forcing system reset.
To prevent such a speculative transaction to leave a CPU cluster,
block it using PMP, by restricting memory region to physically present
memory. To achieve this, on early init:
- update flags for the last all-inclusive "0..~0 RWX" entry to be
inaccessible MMIO. MMIO serves to set up PMA attributes to uncached
non-prefetchable, preventing transactions to reach system NOC
- add an all-permissive entry matching DRAM.
Resulting memory regions:
Domain0 Region00 : 0x0000000800100000-0x000000080013ffff M: (F,R,X) S/U: ()
Domain0 Region01 : 0x0000000800100000-0x00000008001fffff M: (F,R,W) S/U: ()
Domain0 Region02 : 0x0000000048700000-0x000000004870ffff M: (I,R,W) S/U: ()
Domain0 Region03 : 0x0000000067480000-0x000000006748ffff M: (I,R,W) S/U: ()
Domain0 Region04 : 0x0000000067500000-0x000000006750ffff M: (I,R,W) S/U: ()
Domain0 Region05 : 0x0000000048740000-0x000000004875ffff M: (I,R,W) S/U: ()
Domain0 Region06 : 0x00000000674c0000-0x00000000674dffff M: (I,R,W) S/U: ()
Domain0 Region07 : 0x0000000067540000-0x000000006755ffff M: (I,R,W) S/U: ()
Domain0 Region08 : 0x0000000000000000-0x000000007fffffff M: (I,R,W) S/U: (R,W)
Domain0 Region09 : 0x0000000800000000-0x00000008ffffffff M: () S/U: (R,W,X)
Domain0 Region10 : 0x0000001000000000-0x0000001fffffffff M: (I) S/U: (R,W)
Domain0 Region11 : 0x0000000000000000-0xffffffffffffffff M: (I) S/U: ()
Here Region09 covers DRAM, region 11 set to non-accessible
uncached no-prefetch for the entire address range
Signed-off-by: Vladimir Kondratiev <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
Debug print MMIO regions
Signed-off-by: Vladimir Kondratiev <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
CPU clusters 1 and 2 cannot access NCORE registers through AUX ports.
AUX ports of clusters 1 and 2 are connected to NCORE through east port.
East port has no access to NCORE registers address space.
Re-route NCORE registers range to MEM port by re-configuring MMIO
regions in the GCR. REsulting map is as below. Mind a gap between
regions [1] and [2]; this gap covering NCORE registers now routed
to the default MEM port
Cluster 0: 4 MMIO regions
[0] : 0x0000000000000000-0x000000001fff0000 AUX0 UC|UCA
[1] : 0x0000000020000000-0x00000000677f0000 AUX0 ANY
[2] : 0x0000000080000000-0x0000001fffff0000 AUX0 UC|UCA
[3] : --disabled--
Cluster 1: 4 MMIO regions
[0] : 0x0000000000000000-0x000000001fff0000 AUX0 UC|UCA
[1] : 0x0000000020000000-0x00000000677f0000 AUX0 ANY
[2] : 0x0000000080000000-0x0000001fffff0000 AUX0 UC|UCA
[3] : --disabled--
Cluster 2: 4 MMIO regions
[0] : 0x0000000000000000-0x000000001fff0000 AUX0 UC|UCA
[1] : 0x0000000020000000-0x00000000677f0000 AUX0 ANY
[2] : 0x0000000080000000-0x0000001fffff0000 AUX0 UC|UCA
[3] : --disabled--
Signed-off-by: Vladimir Kondratiev <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
Use eyeq7 specific method to synchronously restart architectural
mtimer and eyeq7h specific high-resolution timer with common
hardware trigger. This ensures all timers are precisely in sync
Signed-off-by: Vladimir Kondratiev <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
Switch to GENMASK, EXTRACT_BITFIELD, INSERT_BITFIELD
Signed-off-by: Vladimir Kondratiev <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
Reserve memory regions for CPU clusters according to P8700
cluster memory layout.
There's a set of components in the CPU cluster according to [1]
[1] https://mips.com/wp-content/uploads/2025/11/P8700-F_Programmers_Reference_Manual-TM.pdf
Signed-off-by: Vladimir Kondratiev <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
P8700 has a read-only cache configuration registers.
Provide a CPU specific function to extract cache information.
Use this information in the eyeq7h board for informational
message
Signed-off-by: Vladimir Kondratiev <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
On the EyeQ7H board, there's cluster level resets found in the
accelerator OLBs. These resets should be deasserted once on boot
and never used after
Signed-off-by: Vladimir Kondratiev <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
In the design, accelerator clusters ACC[01] and XNN[01] presence
indicated by the OLB_WEST register OLB_WEST_TSTCSR.
In the simulation environments, part (or all) accelerators may be
not instantiated
Disable clusters not present in the model, updating the DTB
Signed-off-by: Vladimir Kondratiev <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
In the eyeq7h platform, there's extra power control for the CPU
clusters. To enable cluster, it should be powered up using this OLB
registers prior to accessing any cluster management registers
Signed-off-by: Vladimir Kondratiev <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
|
Refactor MIPS P8700 support, convert P8700 into a "CPU" and add
2 platforms using this CPU:
- "boston" - FPGA platform developed by MIPS
- "eyeq7h" - automotive platform by Mobileye
Signed-off-by: Vladimir Kondratiev <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Anup Patel <[email protected]>
|
