| Age | Commit message (Collapse) | Author |
|---|
|
* [bsp][stm32] Add stm32n657-st-nucleo BSP
* style: format STM32 HAL drivers and STM32N657 BSP with clang-format
|
|
add serial v2 RX DMA event mode configuration for DMA-enabled builds
support STM32 UART RX DMA half/full transfer interrupt policy selection
validate RX DMA event mode before applying serial configuration
restore serial configuration when backend configure fails
|
|
- add drv_dma common helpers and stm32_dma_config descriptors for STM32 series
- refactor i2c, spi, usart, qspi, and sdio DMA setup and deinit paths to reuse the common layer
- unify DMA IRQ enable, rollback handling, and const board-level DMA configuration usage
|
|
add a control command to register a per-device uart error callback
invoke the callback from the HAL uart error hook and clear it before close
return -RT_ENOSYS when dma mode is requested without dma support
propagate the set-int fallback result in optmode setup to keep control return values explicit
|
|
* [bsp][stm32][drv_usart_v2] uart_isr不再使用链式调用，RXNE内循环读空，一些细节优化
* [componnents][drivers][serial_v2] 增加获取config接口，使用rt_tick_get_delta替代内部的时间绕回判断，写满丢弃策略rx接收数据错乱修复，clang-tidy和cppcheck审查优化
* [utest][drivers][serial_v2] 测试例程进行优化
* [bsp][stm32][drv_usart_v2] 撤回DMAMUX1修改
* [componnents][drivers][serial_v2] read和write不再返回-RT_ETIMEOUT改为已发送或读取的字节数，细节优化
* [utest][drivers][serial_v2] 增加单独的timeout测试，减少测试中的硬延时
* [utest][drivers][serial_v2] 漏提交的posix下标志位
* [utest][drivers][serial_v2] 优化测试例程
* [bsp][stm32][drv_usart_v2] transmit返回错误值，RXNE增加超时逻辑
* [componnents][drivers][serial_v2] 增加transmit错误处理，增加超时退出机制显式的避免死循环
* [componnents][drivers][serial_v2] 适配serial_v2和posix非libc标准库下的console和shell
|
|
|
|
写满丢弃策略对dma_ping_buf的处理有误、细节调整
|
|
加超时时间、flush、获取缓冲区数据长度命令、数据溢出逻辑修复、稳定性细节优化、添加更多serial_v2测试用例
[components][serial_v2] 优化txflush逻辑、对tx的activated做中断保护
[components][at] at_client适配新版serial_v2
[components][at] at_server适配新版serial_v2
[components][serial_v2] 测试用例增加循环调用，format测试用例
[components][serial_v2] poll模式判断逻辑错误
[components][serial_v2] 测试用例去掉一些非必要延时
[components][serial_v2] 测试例程使用menuconfig进行配置，更新readme
[components][at_client] at_client_getchar返回值错误、at_client解析线程优先级错误设置
[components][at] 错误码应该返回负值
[components][serial_v2] TCFLSH和FIONREAD完善、control函数增加错误返回值
[components][serial_v2] RT_SERIAL_CTRL_GET_RX_DATA_LEN更改为RT_SERIAL_CTRL_GET_UNREAD_BYTES_COUNT
[utest][serial_v2] TC_UART_SEND_TIMES替换为RT_SERIAL_TC_SEND_ITERATIONS
[components][serial_v2] FIONREAD参数应该是无符号类型
[utest][serial_v2] 完善测试用例
[components][serial_v2] 避免使用三目运算符
[components][serial_v2] 使用clang-format格式化代码
[components][serial_v2] 添加get超时时间命令
[components][serial_v2] 完善posix接口
[components][serial_v2] 阻塞接口添加阻塞时间为0时的处理逻辑、优化RX阻塞接收逻辑
[components][serial_v2] 设置超时时间命令的参数改为指针形式
[components][serial_v2] nbuf发送添加超时时间为0时的逻辑
[components][serial_v2] 完善添加测试用例
[utest][serial_v2] 修复依赖关系
[components][serial_v2] 非阻塞模式下tx_flush错误修复
[components][serial_v2] activated使用原子API
[components][serial_v2] 优化DMA逻辑、没使能DMA时屏蔽DMA逻辑节约资源
[components][serial_v2] 提供写满时丢弃新数据和覆盖旧数据策略，写满丢弃策略效率更高
[components][serial_v2] 部分平台适配写满时两种策略功能
[components][serial_v2] DMA模式暂不支持丢弃新数据策略
[utest][serial_v2] 优化测试代码
[components][serial_v2] DMA模式下使用乒乓缓冲、DMA模式支持丢弃新数据策略
[utest][serial_v2] 适配DMA乒乓缓冲
[bsp][serial_v2] 部分bsp适配DMA下乒乓缓冲
[components][serial_v2] 使用spinlock替换中断，对部分结构体变量使用原子操作
[utest][serial_v2] 更新测试用例
[components][at] 适配new serialv2不再判断RTT版本号
[components][at] 删除多余的中文注释
[utest][serial_v2] 添加交叉echo示例，qemu环境下专用
[bsp][qemu] 适配串口v2并开启fifo
[components][at] 修复合并导致的错误
[bsp][n32] 适配serial_v2，没有经过测试
[components][serial_v2] 格式化代码
[utest][serial_v2] 删除无意义的打印
|
|
* [bsp/stm32]fix compile warning
|
|
|
|
|
|
- move all normal drivers (devices framework drivers) into drivers
folder.
- create nano folder for nano drivers
nano drivers are only for a simply wrap of the HAL function, and
not seek for adopting rt-thread devcies framework.
- provide unified nano console and GPIO drivers.
|
