| Age | Commit message (Collapse) | Author |
|---|
|
Previously, few Amlogic devices supported EFI capsule updates.
Generally only the Libre Computer ones with SPI flash supported it,
thanks to board-specific code.
This commit commonises capsule update support across supported
Amlogic boards. Similar to Qualcomm's support for it, the dfu string
and firmware name is automatically generated at runtime depending on
which device we are booted from. Right now this supports flashing to
the eMMC/SD and SPI flash.
As usual, the capsule UUID is automatically generated. You can get it
by enabling CONFIG_CMD_EFIDEBUG and running:
=> efidebug capsule esrt
========================================
ESRT: fw_resource_count=1
ESRT: fw_resource_count_max=1
ESRT: fw_resource_version=1
[entry 0]==============================
ESRT: fw_class=796180D4-AAB2-50F1-B16A-53DFF9CA89B2
ESRT: fw_type=unknown
ESRT: fw_version=0
ESRT: lowest_supported_fw_version=0
ESRT: capsule_flags=0
ESRT: last_attempt_version=0
ESRT: last_attempt_status=success
========================================
Reviewed-by: Evgeny Bachinin <[email protected]>
Reviewed-by: Neil Armstrong <[email protected]>
Signed-off-by: Ferass El Hafidi <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Neil Armstrong <[email protected]>
|
|
Supports both GXBB and GXL SoCs.
Reviewed-by: Neil Armstrong <[email protected]>
Signed-off-by: Ferass El Hafidi <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Neil Armstrong <[email protected]>
|
|
Add initial boilerplate for U-Boot SPL support on Amlogic.
Reviewed-by: Neil Armstrong <[email protected]>
Signed-off-by: Ferass El Hafidi <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Neil Armstrong <[email protected]>
|
|
Add a minimal non-DM MMC driver for use in size-constrained
environments.
Signed-off-by: Ferass El Hafidi <[email protected]>
Reviewed-by: Neil Armstrong <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Neil Armstrong <[email protected]>
|
|
Patch introduces:
* chip_id API - useful for various things, but used now for
device_id (did) generation as mentioned in [1] on our private board
code. Our device_id is calculated by means of permutations of
chip_id value.
* new SoCs (a1, s4, etc) are usually coming with the support of chip_id
v2 right away, whereas secure monitors on old SoCs (like axg, g12b,
g12a, etc) may support only chip_id v1. Chip_id API handles both
cases
* meson_sm_get_serial() is described via chip_id API.
Links:
[1] https://lore.kernel.org/linux-arm-kernel/[email protected]/T/#m630fbeea6a6e7d531290b5c0af205af4fb979757
Signed-off-by: Viacheslav Bocharov <[email protected]>
Co-developed-by: Arseniy Krasnov <[email protected]>
Signed-off-by: Arseniy Krasnov <[email protected]>
Signed-off-by: Evgeny Bachinin <[email protected]>
Link: https://lore.kernel.org/r/20250210-meson_chip_id_all_vers-v1-3-b98f8b6880b8@salutedevices.com
Signed-off-by: Neil Armstrong <[email protected]>
|
|
Drop all duplicate newlines. No functional change.
Signed-off-by: Marek Vasut <[email protected]>
|
|
Drop this useless usb.h and now make dwc3_meson_g12a_force_mode
static since only used in the dwc3-meson-g12a.c file.
Reviewed-by: Marek Vasut <[email protected]>
Link: https://lore.kernel.org/r/20240620-u-boot-usb-gxl-phy-set-mode-v2-5-b81c027bc02c@linaro.org
Signed-off-by: Neil Armstrong <[email protected]>
|
|
Drop this useless usb-gx.h and now make dwc3_meson_gxl_force_mode
static since only used in the dwc3-meson-gxl.c file.
Reviewed-by: Marek Vasut <[email protected]>
Link: https://lore.kernel.org/r/20240620-u-boot-usb-gxl-phy-set-mode-v2-4-b81c027bc02c@linaro.org
Signed-off-by: Neil Armstrong <[email protected]>
|
|
Remove the public phy_meson_gxl_usb2_set_mode and move
the implementation in the the set_mode callback.
Reviewed-by: Marek Vasut <[email protected]>
Link: https://lore.kernel.org/r/20240620-u-boot-usb-gxl-phy-set-mode-v2-3-b81c027bc02c@linaro.org
Signed-off-by: Neil Armstrong <[email protected]>
|
|
This patch adds basic clock driver for Amlogic A1 Family which supports
enabling/disabling some gates, getting frequencies and setting rate
with limited reparenting.
Signed-off-by: Igor Prusov <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Neil Armstrong <[email protected]>
|
|
This commit adds functions to manage secure power domain for
Amlogic SoC's using smc functionality.
Signed-off-by: Alexey Romanov <[email protected]>
Reviewed-by: Neil Armstrong <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Neil Armstrong <[email protected]>
|
|
Add support for Amlogic A1 SoC family.
Signed-off-by: Igor Prusov <[email protected]>
Signed-off-by: Evgeny Bachinin <[email protected]>
Reviewed-by: Neil Armstrong <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Neil Armstrong <[email protected]>
|
|
This function can be used by other modules. Also add comments.
Signed-off-by: Alexey Romanov <[email protected]>
Reviewed-by: Neil Armstrong <[email protected]>
Reviewed-by: Mattijs Korpershoek <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Neil Armstrong <[email protected]>
|
|
The static ethernet link type config code is no more needed because now handled by
the meson8b glue driver, delete it.
Signed-off-by: Neil Armstrong <[email protected]>
|
|
Add SoC revision to environment. This can be useful to select the
correct device tree at runtime (N2/N2+).
Signed-off-by: Pascal Vizeli <[email protected]>
Signed-off-by: Stefan Agner <[email protected]>
Reviewed-by: Neil Armstrong <[email protected]>
Signed-off-by: Neil Armstrong <[email protected]>
|
|
Move the asm/arch-meson/sd_emmc.h to a local meson_gx_mmc.h,
remove the useless if/then and fix the meson_gx_mmc.c include.
Signed-off-by: Neil Armstrong <[email protected]>
|
|
The registers which are managed by the meson-gxl-usb3 PHY driver are
actually "USB control" registers (which are "glue" registers which
manage OTG detection and routing of the OTG capable port between the
DWC2 peripheral-only controller and the DWC3 host-only controller).
Drop the meson-gxl-usb3 PHY driver now that the dwc3-meson-gxl-usb
driver supports the USB control registers on GXL and GXM SoCs (these
were previously managed by the meson-gxl-usb3 PHY driver).
Signed-off-by: Neil Armstrong <[email protected]>
|
|
The USB support was initialy done with a set of PHYs and dwc3-of-simple
because the architecture of the USB complex was not understood correctly
at the time (and proper documentation was missing...).
But with the G12A family, the USB complex was correctly understood and
implemented correctly.
This adds a proper driver for the glue, based on the G12A one, but with
enough changes to require a different driver in U-Boot.
Signed-off-by: Neil Armstrong <[email protected]>
|
|
Move this uncommon header out of the common header.
Signed-off-by: Simon Glass <[email protected]>
|
|
Add set_mode function in the Amlogic GXL PHYs that will be called by
the arch code to switch PHYs from/to gadget mode.
Signed-off-by: Neil Armstrong <[email protected]>
|
|
The Secure Monitor offers multiple services, like returning the
SoC unique serial number, and can provide the "reboot reason" as
set by the previous booted system.
This extends the Amlogic specific "sm" cmd with a "reboot_reason" subcommand
to print or set a specified environment variable with the reboot reason in
human readable format.
Signed-off-by: Neil Armstrong <[email protected]>
|
|
Add support for generating an unique MAC address using the SoC internal
serial number from the Secure Monitor interface.
The algorithm generates an unicast locally administered 6bytes minus 2bits
address using an crc16 of the serial for the top 16bits with the lower 2 bits
masked to setup the unicast locally administered property and a crc24 for
the lower 24bits.
Signed-off-by: Neil Armstrong <[email protected]>
|
|
The Secure Monitor interface permits retrieving the SoC Serial Number,
add a function to retrieve it.
Signed-off-by: Neil Armstrong <[email protected]>
|
|
Adds support for Amlogic G12A USB Device mode.
The DWC2 Controller behind the Glue can be connected to an OTG
capable PHY. The Glue setups the PHY mode.
This patch implements Device mode support by adding a board_usb_init/cleanup
setting up the DWC2 controller and switch the OTG capable port to Device
before starting the DWC2 controller in Device mode.
Signed-off-by: Neil Armstrong <[email protected]>
|
|
Add support for the Amlogic G12A SoC, which is a mix between the
new physical memory mapping of AXG and the functionnalities of
the previous Amlogic GXL/GXM SoCs.
To handle the internal ethernet PHY, the Amlogic G12A SoCs now
embeds a dedicated PLL to feed the internal PHY.
Signed-off-by: Jerome Brunet <[email protected]>
Signed-off-by: Neil Armstrong <[email protected]>
|
|
Add basic support for the Amlogic G12A clock controller based on
the AXG driver.
Signed-off-by: Jerome Brunet <[email protected]>
Signed-off-by: Neil Armstrong <[email protected]>
|
|
This adds video output support for Amlogic GXBB/GXL/GXM chips.
The supported ports are CVBS and HDMI (based on DW_HDMI).
When using HDMI, only DMT modes are supported.
There is support for simple-framebuffer (CONFIG_VIDEO_DT_SIMPLEFB)
Signed-off-by: Neil Armstrong <[email protected]>
Signed-off-by: Jorge Ramire-Ortiz <[email protected]>
Signed-off-by: Maxime Jourdan <[email protected]>
[narmstrong: fixed defines alignment in meson_canvas.c]
Reviewed-by: Anatolij Gustschin <[email protected]>
|
|
The Amlogic Meson SoCs ROM supports a boot over USB with a custom protocol.
When no other boot medium are available (or by forcing the USB mode), the
ROM sets the primary USB port as device mode and waits for a Host to
enumerate.
When enumerated, a custom protocol described at [1] permits writing to
memory and execute some specific FIP init code to run the loaded
Arm Trusted Firmware BL2 and BL3 stages before running the BL33 stage.
In this mode, we can load different binaries that can be used by U-boot
like a script image file.
This adds support for a custom USB boot stage only available when the
boot mode is USB and the script file at a pre-defined address is valid.
This support was heavily copied from the Sunxi Allwinner FEL U-Boot support.
The tool pyamlboot described at [2], permits using this boot mode on boards
exposing the first USB port, either as OTG or Host port.
[1] https://github.com/superna9999/pyamlboot/blob/master/PROTOCOL.md
[2] https://github.com/superna9999/pyamlboot/blob/master/README.md
Signed-off-by: Jerome Brunet <[email protected]>
Signed-off-by: Neil Armstrong <[email protected]>
|
|
This patch adds a minimal clock driver for the Amlogic AXG SoC to handle
the basic gates and PLLs.
Signed-off-by: Neil Armstrong <[email protected]>
|
|
This patch adds support for the Amlogic AXG SoC, which is very close from
the Amlogic GXL SoCs with :
- Same 4xCortex-A53 CPUs but clocked at 1.2GHZ max
- DDR Interface limited to DDR4 16bit
- The whole physical register address space has been moved to 0xfxxxxxxx
- The pinctrl setup has changed
- The clock tree is different enough to use a different driver
Signed-off-by: Jerome Brunet <[email protected]>
Signed-off-by: Neil Armstrong <[email protected]>
|
|
We are about to add support for the Amlogic AXG SoC. While very close to
the Gx SoC family, we will need to handle a few thing which are different
in this SoC. Rework the meson arch directory to prepare for this.
Signed-off-by: Jerome Brunet <[email protected]>
Signed-off-by: Neil Armstrong <[email protected]>
|
|
Use the clk framework to initialize clocks from drivers that need them
instead of having hardcoded frequencies and initializations from board
code.
Signed-off-by: Beniamino Galvani <[email protected]>
Signed-off-by: Neil Armstrong <[email protected]>
|
|
Introduce a basic clock driver for Amlogic Meson SoCs which supports
enabling/disabling clock gates and getting their frequency.
Signed-off-by: Beniamino Galvani <[email protected]>
Signed-off-by: Neil Armstrong <[email protected]>
|
|
Taking into account the Amlogic Family name starts with GX, including
the GXBB, GXL and GXM SoCs.
Signed-off-by: Neil Armstrong <[email protected]>
|
|
When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from. So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry. Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.
In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.
This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents. There's also a few places where I found we did not have a tag
and have introduced one.
Signed-off-by: Tom Rini <[email protected]>
|
|
As discussed at [1], the Amlogic Meson GX SoCs can embed a BL31 firmware
and a secondary BL32 firmware.
Since mid-2017, the reserved memory address of the BL31 firmware was moved
and grown for security reasons.
But mainline U-Boot and Linux has the old address and size fixed.
These SoCs have a register interface to get the two firmware reserved
memory start and sizes.
This patch adds a dynamic reservation of the memory zones in the device tree bootmem
reserved memory zone used by the kernel in early boot.
To be complete, the memory zones are also added to the EFI reserved zones.
Depends on patchset "Add support for Amlogic GXL Based SBCs" at [2].
[1] http://lists.infradead.org/pipermail/linux-amlogic/2017-October/004860.html
[2] http://lists.infradead.org/pipermail/linux-amlogic/2017-November/005410.html
Changes since v1:
- switched the #if to if(IS_ENABLED()) to compile all code paths
- renamed function to meson_board_add_reserved_memory()
- added a mem.h header with comment
- updated all boards ft_board_setup()
Changes since RFC v2:
- reduced preprocessor load
- kept Odroid-C2 static memory mapping as exception
Changes since RFC v1:
- switch to fdt rsv mem table and efi reserve memory
- replaced in_le32 by readl()
Reviewed-by: Simon Glass <[email protected]>
Signed-off-by: Neil Armstrong <[email protected]>
[trini: Fix warning on khadas-vim over missing <asm/arch/mem.h>
Signed-off-by: Tom Rini <[email protected]>
|
|
Introduce a generic common Ethernet Hardware init function
common to all Amlogic GX SoCs with support for the
Internal PHY enable for GXL SoCs.
Signed-off-by: Neil Armstrong <[email protected]>
|
|
Signed-off-by: Beniamino Galvani <[email protected]>
|
|
Add a driver for the I2C controller available on Amlogic Meson SoCs.
Signed-off-by: Beniamino Galvani <[email protected]>
Reviewed-by: Neil Armstrong <[email protected]>
|
|
On Amlogic Meson GXL/GXM, supplementary ethernet configuration registers
were added to configure the internal RMII PHY interface.
Signed-off-by: Neil Armstrong <[email protected]>
|
|
This commit adds GPIO support to the Amlogic Meson pin controller
driver, based on code from Linux kernel.
Reviewed-by: Simon Glass <[email protected]>
Signed-off-by: Beniamino Galvani <[email protected]>
|
|
This driver implements MMC support on Meson GX (S905) based systems.
It's based on Carlo Caione's work, changes:
- BLK support added
- general refactoring
Signed-off-by: Carlo Caione <[email protected]>
Signed-off-by: Andreas Färber <[email protected]>
Signed-off-by: Heiner Kallweit <[email protected]>
Tested-by: Vagrant Cascadian <[email protected]>
|
|
Remove the device definition from board file, update the driver with
the new compatible property and update config with necessary options.
Signed-off-by: Beniamino Galvani <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
|
Implement calls to secure monitor to read the MAC address from e-fuse.
Signed-off-by: Beniamino Galvani <[email protected]>
|
|
This adds platform code for the Amlogic Meson GXBaby (S905) SoC and a
board definition for ODROID-C2. This initial submission only supports
UART and Ethernet (through the existing Designware driver). DTS files
are the ones submitted to Linux arm-soc for 4.7 [1].
[1] https://patchwork.ozlabs.org/patch/603583/
Signed-off-by: Beniamino Galvani <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
|
