| Age | Commit message (Collapse) | Author |
|---|
|
omap4 support was dropped by b0ee3fe642c ("arm: ti: Remove omap4 platform
support") because the supported boards hadn't done the conversion to
CONFIG_DM_I2C in time. It still exists some omap4-based products and
they could benefit from the latest U-Boot support for obvious security
reasons.
Revert part of b0ee3fe642c to introduce back a minimal support for the
omap4 platform.
Fix the checkpatch's warning/errors induced by this revert. Following
warnings are still present:
| arch/arm/include/asm/arch-omap4/clock.h:445: WARNING: added, moved or deleted file(s), does MAINTAINERS need updating?
| arch/arm/mach-omap2/omap4/hwinit.c:24: WARNING: Use 'if (IS_ENABLED(CONFIG...))' instead of '#if or #ifdef' where possible
| arch/arm/mach-omap2/omap4/sdram_elpida.c:142: CHECK: Avoid CamelCase: <tRPab>
| arch/arm/mach-omap2/omap4/sdram_elpida.c:143: CHECK: Avoid CamelCase: <tRCD>
| arch/arm/mach-omap2/omap4/sdram_elpida.c:144: CHECK: Avoid CamelCase: <tWR>
| arch/arm/mach-omap2/omap4/sdram_elpida.c:145: CHECK: Avoid CamelCase: <tRASmin>
| arch/arm/mach-omap2/omap4/sdram_elpida.c:146: CHECK: Avoid CamelCase: <tRRD>
| arch/arm/mach-omap2/omap4/sdram_elpida.c:147: CHECK: Avoid CamelCase: <tWTRx2>
| arch/arm/mach-omap2/omap4/sdram_elpida.c:148: CHECK: Avoid CamelCase: <tXSR>
| arch/arm/mach-omap2/omap4/sdram_elpida.c:149: CHECK: Avoid CamelCase: <tXPx2>
| arch/arm/mach-omap2/omap4/sdram_elpida.c:150: CHECK: Avoid CamelCase: <tRFCab>
| arch/arm/mach-omap2/omap4/sdram_elpida.c:151: CHECK: Avoid CamelCase: <tRTPx2>
| arch/arm/mach-omap2/omap4/sdram_elpida.c:152: CHECK: Avoid CamelCase: <tCKE>
| arch/arm/mach-omap2/omap4/sdram_elpida.c:153: CHECK: Avoid CamelCase: <tCKESR>
| arch/arm/mach-omap2/omap4/sdram_elpida.c:154: CHECK: Avoid CamelCase: <tZQCS>
| arch/arm/mach-omap2/omap4/sdram_elpida.c:155: CHECK: Avoid CamelCase: <tZQCL>
| arch/arm/mach-omap2/omap4/sdram_elpida.c:156: CHECK: Avoid CamelCase: <tZQINIT>
| arch/arm/mach-omap2/omap4/sdram_elpida.c:157: CHECK: Avoid CamelCase: <tDQSCKMAXx2>
| arch/arm/mach-omap2/omap4/sdram_elpida.c:158: CHECK: Avoid CamelCase: <tRASmax>
| arch/arm/mach-omap2/omap4/sdram_elpida.c:159: CHECK: Avoid CamelCase: <tFAW>
| arch/arm/mach-omap2/omap4/sdram_elpida.c:209: CHECK: Avoid CamelCase: <tRL>
| arch/arm/mach-omap2/omap4/sdram_elpida.c:210: CHECK: Avoid CamelCase: <tRP_AB>
| arch/arm/mach-omap2/omap4/sdram_elpida.c:213: CHECK: Avoid CamelCase: <tRAS_MIN>
| arch/arm/mach-omap2/omap4/sdram_elpida.c:215: CHECK: Avoid CamelCase: <tWTR>
| arch/arm/mach-omap2/omap4/sdram_elpida.c:216: CHECK: Avoid CamelCase: <tXP>
| arch/arm/mach-omap2/omap4/sdram_elpida.c:217: CHECK: Avoid CamelCase: <tRTP>
I didn't find an clean way to fix the "don't use #ifdef" warning as we
need to define the gpio_bank for the SPL build only.
For the CamelCase warnings, the incriminated attributes represent
timings, so IMHO, it is more readable with CamelCase.
Set myself as OMAP4 maintainer.
Signed-off-by: Bastien Curutchet <[email protected]>
|
|
There are no longer any OMAP4 platforms in U-Boot, remove the related
functionality.
Signed-off-by: Tom Rini <[email protected]>
|
|
Drop all duplicate newlines. No functional change.
Signed-off-by: Marek Vasut <[email protected]>
|
|
This is always defined to 2, and referenced in two places. Move the
define to <asm/omap_common.h> and make sure the code that uses this
includes that file. Make <asm/arch-omap*/clock.h> not include that
file, as we don't need to be doing so.
Signed-off-by: Tom Rini <[email protected]>
|
|
It is bad practice to include common.h in other header files since it can
bring in any number of superfluous definitions. It implies that some C
files don't include it and thus may be missing CONFIG options that are set
up by that file. The C files should include these themselves.
Update some header files in arch/arm to drop this.
Signed-off-by: Simon Glass <[email protected]>
|
|
When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from. So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry. Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.
In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.
This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents. There's also a few places where I found we did not have a tag
and have introduced one.
Signed-off-by: Tom Rini <[email protected]>
|
|
This correctly enables the USB PHY clocks, by enabling CM_ALWON_USBPHY_CLKCTRL
and correctly setting CM_L3INIT_USBPHY_CLKCTRL's value.
Signed-off-by: Paul Kocialkowski <[email protected]>
|
|
OMAP4470 reference design uses TWL6032 PMIC
with a following connection scheme:
VDD_CORE = TWL6032 SMPS2
VDD_MPU = TWL6032 SMPS1
VDD_IVA = TWL6032 SMPS5
Set voltage and frequency values according to
OMAP4470 Data Manual Operating Condition Addendum v0.7
Signed-off-by: Taras Kondratiuk <[email protected]>
|
|
Signed-off-by: Wolfgang Denk <[email protected]>
[trini: Fixup common/cmd_io.c]
Signed-off-by: Tom Rini <[email protected]>
|
|
Update PLL values.
SYS_CLKSEL value for 20MHz is changed to 2. In other platforms
SYS_CLKSEL value 2 represents reserved. But in sys_clk array
ind 1 is used for 13Mhz. Since other platforms are not using
13Mhz, reusing index 1 for 20MHz.
Signed-off-by: Lokesh Vutla <[email protected]>
Signed-off-by: Sricharan R <[email protected]>
|
|
The sys_clk on the dra evm board is 20MHZ.
Changing the configuration for the same.
And also moving V_SCLK, V_OSCK defines to
arch/clock.h for OMAP4+ boards.
Signed-off-by: Sricharan R <[email protected]>
Signed-off-by: Lokesh Vutla <[email protected]>
|
|
To be consistent with other ARM platforms,
renaming asm/arch-omap*/clocks.h to asm/arch-omap*/clock.h
Signed-off-by: Lokesh Vutla <[email protected]>
|
