| Age | Commit message (Collapse) | Author |
|---|
|
omap4 support was dropped by b0ee3fe642c ("arm: ti: Remove omap4 platform
support") because the supported boards hadn't done the conversion to
CONFIG_DM_I2C in time. It still exists some omap4-based products and
they could benefit from the latest U-Boot support for obvious security
reasons.
Revert part of b0ee3fe642c to introduce back a minimal support for the
omap4 platform.
Fix the checkpatch's warning/errors induced by this revert. Following
warnings are still present:
| arch/arm/include/asm/arch-omap4/clock.h:445: WARNING: added, moved or deleted file(s), does MAINTAINERS need updating?
| arch/arm/mach-omap2/omap4/hwinit.c:24: WARNING: Use 'if (IS_ENABLED(CONFIG...))' instead of '#if or #ifdef' where possible
| arch/arm/mach-omap2/omap4/sdram_elpida.c:142: CHECK: Avoid CamelCase: <tRPab>
| arch/arm/mach-omap2/omap4/sdram_elpida.c:143: CHECK: Avoid CamelCase: <tRCD>
| arch/arm/mach-omap2/omap4/sdram_elpida.c:144: CHECK: Avoid CamelCase: <tWR>
| arch/arm/mach-omap2/omap4/sdram_elpida.c:145: CHECK: Avoid CamelCase: <tRASmin>
| arch/arm/mach-omap2/omap4/sdram_elpida.c:146: CHECK: Avoid CamelCase: <tRRD>
| arch/arm/mach-omap2/omap4/sdram_elpida.c:147: CHECK: Avoid CamelCase: <tWTRx2>
| arch/arm/mach-omap2/omap4/sdram_elpida.c:148: CHECK: Avoid CamelCase: <tXSR>
| arch/arm/mach-omap2/omap4/sdram_elpida.c:149: CHECK: Avoid CamelCase: <tXPx2>
| arch/arm/mach-omap2/omap4/sdram_elpida.c:150: CHECK: Avoid CamelCase: <tRFCab>
| arch/arm/mach-omap2/omap4/sdram_elpida.c:151: CHECK: Avoid CamelCase: <tRTPx2>
| arch/arm/mach-omap2/omap4/sdram_elpida.c:152: CHECK: Avoid CamelCase: <tCKE>
| arch/arm/mach-omap2/omap4/sdram_elpida.c:153: CHECK: Avoid CamelCase: <tCKESR>
| arch/arm/mach-omap2/omap4/sdram_elpida.c:154: CHECK: Avoid CamelCase: <tZQCS>
| arch/arm/mach-omap2/omap4/sdram_elpida.c:155: CHECK: Avoid CamelCase: <tZQCL>
| arch/arm/mach-omap2/omap4/sdram_elpida.c:156: CHECK: Avoid CamelCase: <tZQINIT>
| arch/arm/mach-omap2/omap4/sdram_elpida.c:157: CHECK: Avoid CamelCase: <tDQSCKMAXx2>
| arch/arm/mach-omap2/omap4/sdram_elpida.c:158: CHECK: Avoid CamelCase: <tRASmax>
| arch/arm/mach-omap2/omap4/sdram_elpida.c:159: CHECK: Avoid CamelCase: <tFAW>
| arch/arm/mach-omap2/omap4/sdram_elpida.c:209: CHECK: Avoid CamelCase: <tRL>
| arch/arm/mach-omap2/omap4/sdram_elpida.c:210: CHECK: Avoid CamelCase: <tRP_AB>
| arch/arm/mach-omap2/omap4/sdram_elpida.c:213: CHECK: Avoid CamelCase: <tRAS_MIN>
| arch/arm/mach-omap2/omap4/sdram_elpida.c:215: CHECK: Avoid CamelCase: <tWTR>
| arch/arm/mach-omap2/omap4/sdram_elpida.c:216: CHECK: Avoid CamelCase: <tXP>
| arch/arm/mach-omap2/omap4/sdram_elpida.c:217: CHECK: Avoid CamelCase: <tRTP>
I didn't find an clean way to fix the "don't use #ifdef" warning as we
need to define the gpio_bank for the SPL build only.
For the CamelCase warnings, the incriminated attributes represent
timings, so IMHO, it is more readable with CamelCase.
Set myself as OMAP4 maintainer.
Signed-off-by: Bastien Curutchet <[email protected]>
|
|
There are no longer any OMAP4 platforms in U-Boot, remove the related
functionality.
Signed-off-by: Tom Rini <[email protected]>
|
|
When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from. So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry. Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.
In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.
This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents. There's also a few places where I found we did not have a tag
and have introduced one.
Signed-off-by: Tom Rini <[email protected]>
|
|
This cleans up the SPL boot devices for omap platforms and introduces support
for missing boot devices.
Signed-off-by: Paul Kocialkowski <[email protected]>
|
|
Fix the macros guarding the spl.h header for various platforms. Due to
a typo and a propagation of it, the macros went out-of-sync with their
ifdef check, so fix this.
Signed-off-by: Marek Vasut <[email protected]>
Cc: Tom Rini <[email protected]>
|
|
Signed-off-by: Wolfgang Denk <[email protected]>
[trini: Fixup common/cmd_io.c]
Signed-off-by: Tom Rini <[email protected]>
|
|
In the case of booting from certain peripherals, such as UART, we must
not see what the device descriptor says for RAW or FAT mode because in
addition to being nonsensical, it leads to a hang. This is why we have
a test currently for the boot mode being within range. The problem
however is that on some platforms we get MMC2_2 as the boot mode and not
the defined value for MMC2, and in others we get the value for MMC2_2.
This is required to fix eMMC booting on omap5_uevm.
Tested on am335x_evm (UART, NAND, SD), omap3_beagle (NAND, SD on
classic, SD only on xM rev C5) and omap5_uevm (SD, eMMC).
Signed-off-by: Tom Rini <[email protected]>
|
|
Some ONENAND related defines use the term ONE_NAND instead of
ONENAND, as the technology name is ONENAND this patch replaces
all these defines.
Signed-off-by: Enric Balletbo i Serra <[email protected]>
|
|
Move the SPL prototypes from <asm/omap_common.h> into <asm/spl.h> and
add <asm/arch/spl.h> for arch specific portions of CONFIG_SPL_FRAMEWORK.
Signed-off-by: Tom Rini <[email protected]>
|
