| Age | Commit message (Collapse) | Author |
|---|
|
Add support for building U-Boot for Cortex-M33 RSIP core in Renesas
R-Car Gen5 R8A78000 X5H SoC. The main goal is to start U-Boot on the
Cortex-M33 RSIP core, which initializes the hardware and then starts
the Cortex-M33 SCP and Cortex-A720 cores which run the SCP firmware
and applications software respectively. The SCP is responsible for
platform resource management, and is used to start other CPU cores.
The Cortex-M33 build contains its own r8a78000_ironhide_cm33_defconfig
which configures the build for aarch32 instruction set compatible with
the ARMv8M core. The build also uses -cm33 DT and -u-boot.dtsi which
are derived from their non-CM33 counterparts, and add CM33 specifics.
The arch/arm/mach-renesas/u-boot-rsip.lds is derived from generic
arch/arm/cpu/u-boot.lds with adjustments to cater to the RSIP core,
those are entrypoint before vectors, __data_start/__data_end symbols
for data-only relocation, and placement of BSS into read-write SRAM
area.
Signed-off-by: Marek Vasut <[email protected]>
|
|
Add initial support for Renesas R-Car X5H R8A78000 Ironhide board.
This consists mainly of DTs, Makefile and Kconfig entries and board
specific configuration files.
The DTs will be gradually switched over to Linux DTs via OF_UPSTREAM
once Linux DTs become available upstream, as upstreaming progresses.
Signed-off-by: Hai Pham <[email protected]>
Signed-off-by: Marek Vasut <[email protected]>
|
|
Break out SoC specific code from the GR-Peach board and put it into the
board/renesas/common directory so it can be easily shared between the
GR-Peach and Genmai boards.
Signed-off-by: Magnus Damm <[email protected]>
|
|
Remove stale Makefile description, this used to be valid for the
original Makefile from which the common Makefile was made generic,
but is no longer applicable to the common Makefile.
Fixes: c7d2d7f90a91 ("ARM: renesas: Simplify board Makefiles")
Signed-off-by: Marek Vasut <[email protected]>
|
|
Move R-Car Gen3 and Gen4 jump_to_image_no_args() into dedicated
rcar64-spl.c file. The implementation of jump_to_image_no_args()
is identical. No functional change.
Reviewed-by: Quentin Schulz <[email protected]>
Signed-off-by: Marek Vasut <[email protected]>
|
|
The common.c content is specific to 64-bit R-Car SoCs, rename
the file to rcar64-common.c and remove R-Car 64-bit ifdeffery
in the file. No functional change.
Reviewed-by: Quentin Schulz <[email protected]>
Signed-off-by: Marek Vasut <[email protected]>
|
|
Introduce board/renesas/common/Makefile and remove the multiple
duplicate copies of obj := ../common/*.o from board Makefiles.
Let the build system include the common Makefile using the
HAVE_VENDOR_COMMON_LIB and build the common objects that are
shared by all the boards that way. No functional change intended.
Some of the remaining board files which include board specific
settings have been updated to use obj-y += to avoid rewriting
the board obj-y target and avoid dropping object files from the
build.
The board/renesas/common/Makefile is now also used when building
RZG2L targets which also set CONFIG_RCAR_64 symbol and 32bit R-Car
Gen2 targets, however, this common code is specific to 64bit R-Car
only. Inhibit the build of this common code for RZG2L using extra
ifndef CONFIG_RZG2L and do not include any code for R-Car Gen2 so
far.
Signed-off-by: Marek Vasut <[email protected]>
Reviewed-by: Quentin Schulz <[email protected]>
|
|
Rename directory board/renesas/rcar-common to board/renesas/common and
move files. This allows the build system to use HAVE_VENDOR_COMMON_LIB
which automatically includes board/$(VENDOR)/common/Makefile . Create
temporarily empty board/renesas/common/Makefile to be extended with
actual content later in this series. This is a preparatory patch for
board Makefile simplification. No functional change so far.
Reviewed-by: Quentin Schulz <[email protected]>
Signed-off-by: Marek Vasut <[email protected]>
|
