| Age | Commit message (Collapse) | Author |
|---|
|
The global clock controller on SDM670 is similar to SDM845, so let's add
support here.
Reviewed-by: Neil Armstrong <[email protected]>
Signed-off-by: David Wronek <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Casey Connolly <[email protected]>
|
|
Missing for UFS.
Reviewed-by: Neil Armstrong <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Caleb Connolly <[email protected]>
|
|
These are necessary for USB gadget to come up properly, now that
qcom_gate_clk_en fails on unknown clocks.
Signed-off-by: Sam Day <[email protected]>
Reviewed-by: Neil Armstrong <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Caleb Connolly <[email protected]>
|
|
If we try to enable a gate clock that doesn't exist, we used to just
fail silently. This may make sense for early bringup of some core
peripherals that we know are already enabled, but it only makes
debugging missing clocks more difficult.
Bubble up errors now that qcom_gate_clk_en() can return an error code to
catch any still-missing clocks and make it easier to find missing ones
as more complicated peripherals are enabled.
Reviewed-by: Neil Armstrong <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Caleb Connolly <[email protected]>
|
|
Add debug data to dump PLL and RCG clocks.
Signed-off-by: Caleb Connolly <[email protected]>
|
|
As part of bringing the master branch back in to next, we need to allow
for all of these changes to exist here.
Reported-by: Jonas Karlman <[email protected]>
Signed-off-by: Tom Rini <[email protected]>
|
|
When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay
Ethernet"' I failed to notice that b4 noticed it was based on next and
so took that as the base commit and merged that part of next to master.
This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing
changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35.
Reported-by: Jonas Karlman <[email protected]>
Signed-off-by: Tom Rini <[email protected]>
|
|
Remove <common.h> from this driver directory and when needed
add missing include files directly.
Signed-off-by: Tom Rini <[email protected]>
|
|
Allow setting the clock rate for the SD card core clock. This is
required for SD card support on SDM845 devices.
Signed-off-by: Caleb Connolly <[email protected]>
|
|
Most devices only initialise the USB clocks for us if we boot via
"fastboot boot", add the missing clock configuration to get both USB
ports working regardless of the bootloader state.
Reviewed-by: Sumit Garg <[email protected]>
Signed-off-by: Caleb Connolly <[email protected]>
|
|
Define the GDSC power domains for SDM845.
Reviewed-by: Neil Armstrong <[email protected]>
Reviewed-by: Sumit Garg <[email protected]>
Signed-off-by: Caleb Connolly <[email protected]>
|
|
The RCG registers always have the same offsets, so only store the base
CMD register address and calculate the others relative to that.
Reviewed-by: Sumit Garg <[email protected]>
Signed-off-by: Caleb Connolly <[email protected]>
|
|
Some devices like the UART and clock controller reference an RPM(h)
power domain. We don't support this device in U-Boot, so add
DM_FLAG_DEFAULT_PD_CTRL_OFF to tell DM core not to try and enable the
power domain.
Reviewed-by: Sumit Garg <[email protected]>
Signed-off-by: Caleb Connolly <[email protected]>
|
|
The RCG divider field takes a value of (2*h - 1) where h is the divisor.
This allows fractional dividers to be supported by calculating them at
compile time using a macro.
However, the clk_rcg_set_rate_mnd() function was also performing the
calculation. Clean this all up and consistently use the F() macro to
calculate these at compile time and properly support fractional divisors.
Additionally, improve clk_bcr_update() to timeout with a warning rather
than hanging the board, and make the freq_tbl struct and helpers common
so that they can be reused by future platforms.
Reviewed-by: Sumit Garg <[email protected]>
Signed-off-by: Caleb Connolly <[email protected]>
|
|
This property is needed on some platforms to ensure that only the
relevant bits are set in the M/N/D registers.
Reviewed-by: Sumit Garg <[email protected]>
Signed-off-by: Caleb Connolly <[email protected]>
|
|
Currently, it isn't possible to build clock drivers for more than one
platform due to how the msm_enable() and msm_set_rate() callbacks are
implemented.
Extend qcom_clk_data to include function pointers for these and convert
all platforms to use them.
Previously, clock drivers relied on include/configs/<board.h> to include the
board specific sysmap header, however as most of the header contents are clock
driver related, import the contents directly into each clock driver and
remove the header. The only exception here is the dragonboard820c board file
which includes some pinctrl macros, those are also inlined.
Reviewed-by: Sumit Garg <[email protected]>
Signed-off-by: Caleb Connolly <[email protected]>
[caleb: remove additional sysmap-sdm845.h mention]
|
|
Many gate clocks can be enabled with a single register write, add support
for defining these simple gate clocks and add the ones found on SDM845.
While we're here, inline clk_init_uart() into msm_set_rate().
Reviewed-by: Sumit Garg <[email protected]>
Signed-off-by: Caleb Connolly <[email protected]>
|
|
Qualcomm's clock controller blocks actually do much more than it
says on the tin.. They provide clocks, resets and power domains.
Currently, U-Boot requires one to spawn 2 separate devices for
controlling clocks and resets, both spanning the same register space.
Refactor the code to make it work with just a single DT node, making
it compatible with upstream Linux bindings and dropping the dedicated
reset driver in favour of including it in the clock driver.
Heavily inspired by Renesas code for a similar hw block.
[caleb: moved drivers to clk/qcom, added reset driver and adjusted bind
logic. Imported qcom,gcc-ipq4019.h from Linux]
Signed-off-by: Konrad Dybcio <[email protected]>
Reviewed-by: Sumit Garg <[email protected]>
Signed-off-by: Caleb Connolly <[email protected]>
|
|
Clock drivers don't belong here, move them to the right place and
declutter mach-snapdragon a bit.
To de-couple these drivers from specific "target" platforms, add
additional config options to enable each clock driver gated behind a
common CLK_QCOM option and enable them by default for the respective
targets. This will make future work easier as we move towards a generic
Qualcomm target.
Reviewed-by: Sumit Garg <[email protected]>
Signed-off-by: Caleb Connolly <[email protected]>
|
