| Age | Commit message (Collapse) | Author |
|---|
|
Set this flag rather than doing things manually in the test.
Signed-off-by: Simon Glass <[email protected]>
|
|
The _REC suffix doesn't add much. Really what we want to know is whether
the test uses the console, so rename this flag.
Signed-off-by: Simon Glass <[email protected]>
Reviewed-by: Mattijs Korpershoek <[email protected]>
|
|
The UT_TESTF_ macros read as 'unit test test flags' which is not right.
Rename to UTF ('unit test flags').
This has the benefit of being shorter, which helps keep UNIT_TEST()
declarations on a single line.
Give the enum a name and reference it from the UNIT_TEST() macros while
we are here.
Signed-off-by: Simon Glass <[email protected]>
|
|
The existing implementation of ut_assert_nextline_empty() cannot
distinguish between an empty line and no line at all. It can in fact be
called at the end of the recorded output and will happily return
success.
Adjust the logic so that this condition is detected. Show a failure
message in this case.
Fix the one test which falls foul of this fix.
Signed-off-by: Simon Glass <[email protected]>
Fixes: 400175b0a7d ("test: Add a way to check each line of console...")
Reviewed-by: Mattijs Korpershoek <[email protected]>
|
|
https://source.denx.de/u-boot/custodians/u-boot-samsung into next
|
|
https://source.denx.de/u-boot/custodians/u-boot-dfu into next
u-boot-dfu-next-20240820
- Migrate Atmel usb gadget to DM_USB_GADGET
- More small cleanups/improvements on the atmel UDC driver
- Change udc uclass name from "usb" -> "usb_gadget"
|
|
Prepare v2024.10-rc3
|
|
Christian Marangi <[email protected]> says:
These are all the required patches to migrate clk and correctly support
OF_UPSTREAM. This will align the clk index to upstream to support the same
clk implementation with downstream and upstream DTS.
|
|
Add missing A1/2SYS clock ID just as a reference for OF_UPSTREAM
support. These clocks are not defined and are not usable as current
clock topckgen OPs doesn't support gates.
These special node won't ever be used by uboot hence just add them for
reference.
Signed-off-by: Christian Marangi <[email protected]>
Tested-by: Frank Wunderlich <[email protected]>
|
|
Add missing PERIBUS_SEL clock to match upstream linux clk ID order. Also
convert pericfg to mux + gate implementation as now we have also mux on
top of gates.
Signed-off-by: Christian Marangi <[email protected]>
|
|
Add missing clock PERI_UART4_PD for peri clock gates. This is needed to
match upstream linux clk ID in preparation for OF_UPSTREAM.
Also convert infracfg to mux + gate implementation as now we have mux on
top of gates.
Signed-off-by: Christian Marangi <[email protected]>
|
|
Add missing infra clock MUX1_SEL needed for CPU clock. This is needed to
match the upstream clk ID order in preparation for OF_UPSTREAM.
Signed-off-by: Christian Marangi <[email protected]>
|
|
Add missing clock for MAIN_CORE_EN. This is a special clock as it's a
gate for the APMIXED clocks required as a parent for CPU clocks.
Signed-off-by: Christian Marangi <[email protected]>
|
|
Move INFRA_TRNG clock to the bottom of the clk ID to match upstream
linux order. This is in preparation of OF_UPSTREAM.
Signed-off-by: Christian Marangi <[email protected]>
|
|
Rename AUDIO_AWB3 to AUDIO_AWB2 to match upstream linux naming in
preparation for OF_UPSTREAM support.
Signed-off-by: Christian Marangi <[email protected]>
|
|
Christian Marangi <[email protected]> says:
These are all the required patches to migrate clk and correctly support
OF_UPSTREAM. This will align the clk index to upstream to support the same
clk implementation with downstream and upstream DTS.
|
|
Rename each entry from CK to CLK to match the include in upstream kernel
linux.
Signed-off-by: Christian Marangi <[email protected]>
Tested-by: Frank Wunderlich <[email protected]>
|
|
Replace infracfg clk ID with upstream linux version.
The same format is used here with the factor first, then mux and then
gates.
To correctly reference the gates in clk_gate function, define the
gates_offs value in clk_tree now that they are at an offset from mux and
factor.
Signed-off-by: Christian Marangi <[email protected]>
|
|
Move INFRA_TRNG_CK to the bottom of the list to have a 1:1 match with
upstream linux clock ID.
Signed-off-by: Christian Marangi <[email protected]>
|
|
Comment out CK_TOP_A_TUNER as not used and not defined in upstream
kernel linux. This is to permit support of OF_UPSTREAM and have a 1:1
match with upstream linux clock ID.
Signed-off-by: Christian Marangi <[email protected]>
|
|
Now that we can have advanced parent handling for mux, we can drop
spurious topckgen 1/1 factor. This is in preparation to make the clk
ID match the ID in upstream include for mt7986.
Drop the factor entry from mt7986-clk.h and reference to them in
mt7981.dtsi. Muxes and gates are updated to reference the apmixed clk
following how it's done in upstream kernel linux. Add relevant clk type
flag in clk_tree for apmixed.
Signed-off-by: Christian Marangi <[email protected]>
|
|
Reorder TOPCKGEN factor ID to put TOP_FACTOR first and then PLL. This is
to match how it's done in upstream kernel linux and in preparation for
OF_UPSTREAM support.
Signed-off-by: Christian Marangi <[email protected]>
|
|
Rename TOPCKGEN factor clock to upstream neaming.
Upstream kernel linux reference the factor clock for apmixedpll with the
"pll" suffix. Align the naming to the upstream naming format in
preparation for OF_UPSTREAM support.
Also rename rtc clock to drop the CB_ as upstream doesn't have that.
Signed-off-by: Christian Marangi <[email protected]>
|
|
Fix a typo for infra_i2c0_ck where 0 was misspelled as O.
Signed-off-by: Christian Marangi <[email protected]>
|
|
Add missing entry for IPCIE_PIPE_CK infra gate clock. Renumber the clock
order to match the expected offset in the gate array.
Signed-off-by: Christian Marangi <[email protected]>
|
|
Now that we can have advanced parent handling for mux, we can drop
spurious infracfg 1/1 factor. This is in preparation to make the clk
ID match the ID in upstream include for mt7986.
Drop the factor entry from mt7986-clk.h and reference to them in
mt7981.dtsi. Muxes and gates are updated to reference the topckgen clk
following how it's done in upstream kernel linux. Add relevant clk type
flag in clk_tree for infracfg and topckgen.
Signed-off-by: Christian Marangi <[email protected]>
|
|
Upstream kernel linux clock include use SYSAXI_D2 instead of 66M_MCK.
Rename this clock to the upstream kernel in preparation for support of
OF_UPSTREAM.
Signed-off-by: Christian Marangi <[email protected]>
|
|
Upstream kernel linux clock include use TOP_XTAL instead of CB_CKSQ_40M.
Rename this clock to the upstream kernel in preparation for support of
OF_UPSTREAM.
Signed-off-by: Christian Marangi <[email protected]>
|
|
Christian Marangi <[email protected]> says:
These are all the required patches to migrate clk and correctly support
OF_UPSTREAM. This will align the clk index to upstream to support the same
clk implementation with downstream and upstream DTS.
|
|
Rename each entry from CK to CLK to match the include in upstream kernel
linux.
Signed-off-by: Christian Marangi <[email protected]>
Tested-by: Frank Wunderlich <[email protected]>
|
|
Replace infracfg clk ID with upstream linux version.
The same format is used here with the factor first, then mux and then
gates.
To correctly reference the gates in clk_gate function, define the
gates_offs value in clk_tree now that they are at an offset from mux and
factor.
Drop any comment that reference the clock ID as we now have a 1:1 match
with upstream kernel linux.
Signed-off-by: Christian Marangi <[email protected]>
|
|
Comment out infracfg clk not defined in upstream kernel linux clock ID
include. These clock are not used and can be safely commented. Keep them
just to have a reference of their existence.
Signed-off-by: Christian Marangi <[email protected]>
|
|
Now that we can have advanced parent handling for mux, we can drop
spurious topckgen 1/1 factor. This is in preparation to make the clk
ID match the ID in upstream include for mt7988.
Drop the factor entry from mt7988-clk.h and reference to them in
mt7988.dtsi. Muxes and gates are updated to reference the apmixed clk
following how it's done in upstream kernel linux. Add relevant clk type
flag in clk_tree for apmixed and topckgen.
Also move TOP_XTAL to the fixed clock table following how it's done in
upstream linux kernel.
Signed-off-by: Christian Marangi <[email protected]>
|
|
Reorder TOPCKGEN factor ID to put TOP_FACTOR first and then PLL. This is
to match how it's done in upstream kernel linux and in preparation for
OF_UPSTREAM support.
Signed-off-by: Christian Marangi <[email protected]>
|
|
Rename TOPCKGEN factor clock to upstream neaming.
Upstream kernel linux reference the factor clock for apmixedpll with the
"pll" suffix. Align the naming to the upstream naming format in
preparation for OF_UPSTREAM support.
Also rename rtc clock to drop the CB_ as upstream doesn't have that.
Signed-off-by: Christian Marangi <[email protected]>
|
|
Now that we can have advanced parent handling for mux, we can drop
spurious infracfg 1/1 factor. This is in preparation to make the clk
ID match the ID in upstream include for mt7988.
Drop the factor entry from mt7988-clk.h and reference to them in
mt7988.dtsi. Muxes and gates are updated to reference the topckgen clk
following how it's done in upstream kernel linux.
Signed-off-by: Christian Marangi <[email protected]>
|
|
Move INFRA_PCIE_PERI_26M_CK_Px clock at top of the infracfg gates
in preparation for support of OF_UPSTREAM to have a 1:1 match with
upstream clock ID.
Signed-off-by: Christian Marangi <[email protected]>
|
|
Upstream kernel linux clock include use TOP_NPU_SEL instead of
TOP_CK_NPU_SEL_CM_TOPS_SEL.
Rename this clock to the upstream kernel in preparation for support of
OF_UPSTREAM.
Signed-off-by: Christian Marangi <[email protected]>
|
|
Upstream kernel linux clock include use TOP_DA_SEL instead of
TOP_DA_SELM_XTAL_SEL.
Rename this clock to the upstream kernel in preparation for support of
OF_UPSTREAM.
Signed-off-by: Christian Marangi <[email protected]>
|
|
Upstream kernel linux clock include use TOP_XTAL instead of CB_CKSQ_40M.
Rename this clock to the upstream kernel in preparation for support of
OF_UPSTREAM.
Signed-off-by: Christian Marangi <[email protected]>
|
|
Christian Marangi <[email protected]> says:
These are all the required patches to migrate clk and correctly support
OF_UPSTREAM. This will align the clk index to upstream to support the same
clk implementation with downstream and upstream DTS.
|
|
Rename each entry from CK to CLK to match the include in upstream kernel
linux.
Signed-off-by: Christian Marangi <[email protected]>
|
|
Replace infracfg clk ID with upstream linux version.
Add some missing clk for PWM3 and for PCIe. The same format is used here
with the factor first, then mux and then gates.
To correctly reference the gates in clk_gate function, define the
gates_offs value in clk_tree now that they are at an offset from mux and
factor.
Signed-off-by: Christian Marangi <[email protected]>
|
|
Now that we can have advanced parent handling for mux, we can drop
spurious infracfg 1/1 factor. This is in preparation to make the clk
ID match the ID in upstream include for mt7981.
Drop the factor entry from mt7981-clk.h and reference to them in
mt7981.dtsi. Muxes and gates are updated to reference the topckgen clk
following how it's done in upstream kernel linux. Add relevant clk type
flag in clk_tree for infracfg and topckgen.
Signed-off-by: Christian Marangi <[email protected]>
|
|
Fix a typo for infra_i2c0_ck where 0 was misspelled as O.
Signed-off-by: Christian Marangi <[email protected]>
|
|
Add missing clock for infra_ipcie_pipe to make PCIe correctly work. This
clock is a parent of the fixed clock from topckgen cb_cksq_40m.
Signed-off-by: Christian Marangi <[email protected]>
|
|
Christian Marangi <[email protected]> says:
These are all the required patches to migrate clk and correctly support
OF_UPSTREAM. This will align the clk index to upstream to support the same
clk implementation with downstream and upstream DTS.
|
|
Define id_offs_map and use clk ID form upstream linux kernel to have a
1:1 match for the TOPCKGEN clock and permit usage of OF_UPSTREAM with
upstream dtsi.
For all the gate clock, the clk ID starts from 1 instead of zero. Define
an additional clock tree for them and set the .gates_offs to 1 to
account for this.
Signed-off-by: Christian Marangi <[email protected]>
|
|
host->quirks field is only used internally in exynos_dw_mmc.c driver.
To avoid cluttering the scope of struct dwmci_host, move quirks field
into Exynos driver's chip data, where it can be statically defined.
No functional change.
Signed-off-by: Sam Protsenko <[email protected]>
Signed-off-by: Minkyu Kang <[email protected]>
|
|
Some chips like Exynos4412 have fixed internal CIU clock divider.
Instead of reading it from non-standard "div" dts property, store its
value in the driver internally, in static chip data associated with
corresponding compatible. This makes it possible to avoid using
host->div for storing it, so the latter can be removed safely. Also
create a helper function called exynos_dwmmc_get_ciu_div() for getting
the current div value: in case the fixed div is provided in the chip
data it will be used, otherwise the current div value is being read from
CLKSEL register.
The insights for this change were taken from dw_mmc-exynos.c driver in
Linux kernel.
No functional change.
Signed-off-by: Sam Protsenko <[email protected]>
Signed-off-by: Minkyu Kang <[email protected]>
|
