| Age | Commit message (Collapse) | Author |
|---|
|
|
|
修复 SCI SPI 分频参数和运行时配置生命周期，保持位宽单位一致，应用模式及片选配置，并在收发超时或错误后停止传输、清理状态。
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Add M85 device-tree GPIO and external-interrupt controllers, IRQ20 FSP integration, built-in DTB support, and BSP usage documentation.
|
|
|
|
|
|
|
|
The Renesas LCD helper treats LCD_WIDTH and LCD_HEIGHT as pixel counts. The framebuffer clear loop and lcd_draw_pixel() accepted those count values as valid indexes, which can write one pixel past the framebuffer.
Use strict bounds for the 0-based framebuffer indexes and adjust the 180-degree rotation mapping to target the last valid row and column.
Generated-by: OpenAI Codex
Signed-off-by: Old-Ding <[email protected]>
|
|
Validate the second and third digits of RA PXXX pin names against their own characters. The previous checks used name[1] for those upper bounds, so non-digit suffixes could pass validation.
Generated-by: OpenAI Codex
Signed-off-by: Old-Ding <[email protected]>
|
|
* [components][clock_time] Refactor time subsystem around clock_time
Introduce the clock_time core with clock source/event separation, high-resolution scheduling, and boot-time helpers, plus clock_timer adapters for timer peripherals.
Remove legacy ktime/cputime/hwtimer implementations and migrate arch and BSP time paths to the new subsystem while keeping POSIX time integration functional.
Update drivers, Kconfig/SConscript wiring, documentation, and tests; add clock_time overview docs and align naming to clock_boottime/clock_hrtimer/clock_timer.
* [components][clock_time] Use BSP-provided clock timer frequency on riscv64
* [risc-v] Use runtime clock timer frequency for tick and delays
* [bsp] Add clock timer frequency hooks for riscv64 boards
* [bsp] Update Renesas RA driver doc clock_timer link
* [bsp] Sync zynqmp-r5-axu4ev rtconfig after config refresh
* [bsp][rk3500] Update rk3500 clock configuration
* [bsp][hpmicro] Add rt_hw_us_delay hook and update board delays
* [bsp][stm32l496-st-nucleo] enable clock_time for hwtimer sample in ci
* [bsp][hpmicro] Fix rtconfig include scope for hpm6750evk
Move rtconfig.h include outside the ENET_MULTIPLE_PORT guard for hpm6750evk and hpm6750evk2 so configuration macros are available regardless of ENET settings.
* [bsp][raspi3] select clock time for systimer
* [bsp][hpm5300evk] Trim trailing blank line
* [bsp][hpm5301evklite] Trim trailing blank line
* [bsp][hpm5e00evk] Trim trailing blank line
* [bsp][hpm6200evk] Trim trailing blank line
* [bsp][hpm6300evk] Trim trailing blank line
* [bsp][hpm6750evk] Trim trailing blank line
* [bsp][hpm6750evk2] Trim trailing blank line
* [bsp][hpm6750evkmini] Trim trailing blank line
* [bsp][hpm6800evk] Trim trailing blank line
* [bsp][hpm6e00evk] Trim trailing blank line
* [bsp][nxp] switch lpc178x to gcc and remove mcx timer source
* [bsp][stm32] fix the CONFIG_RT_USING_CLOCK_TIME issue.
* [docs][clock_time] add clock time documentation
* [docs][clock_time] Update clock time subsystem documentation
- Update device driver index to use correct page reference
- Clarify upper layer responsibilities in architecture overview
- Update README to describe POSIX/libc, Soft RTC, and device driver usage
- Refine architecture diagram with improved layout and color scheme
- Remove obsolete clock_timer.md file
* [kernel][utest] Trim trailing space
* [clock_time] Fix hrtimer wrap handling
* [clock_time] fix the static rt_inline issue
* [clock_time] fix the rt_clock_hrtimer_control result issue
|
|
|
|
义 (#10859)
* [BSP][renesas][rsoc][fix]:移除HAL_Drivers/config/ra2a1,add pwm configuration items
* 在pwm_config里新增对BSP_USING_PWM10到BSP_USING_PWM12的定义
|
|
* [bsp][renesas][ra4m1-ek] add a new bsp for ra4m1-ek board
* [bsp][renesas][ra4m1-ek] fix can driver compile problem
* [bsp][renesas][ra4m1-ek] bsp code format
* [bsp][renesas][ra4m1-ek] reset file status to original generated by RASC
* [bsp][renesas][ra4m1-ek] support RT-Thread Nano
* [bsp][renesas][ra4m1-ek] make it mini support for GPIO && USART
* [bsp][renesas][ra4m1-ek] make it compilable under the GCC compiler
* [bsp][renesas][ra4m1-ek] remove component RT_USING_CPLUSPLUS
* [bsp][renesas][ra4m1-ek] reduce bsp peripheral device driver
|
|
* [bsp][renesas]add EK-RA2E2 sci_uart support
* [bsp][renesas] add EK-RA2E2 (i2c/spi/adc/pwm/flash/gpio interrupt) support
* [bsp][renesas] comment drv_flash.c and format drv_i2c.c
|
|
* add EK-RA2E2 support
|
|
* bsp: all Renesas bsp support the nano one-click switch.
* fix pr conflicts.
|
